boutique wholesale jewelry suppliers
1 thought on “boutique wholesale jewelry suppliers How to install the diamond fan fan”
Leave a Comment
You must be logged in to post a comment.
Shopping Cart
boutique wholesale jewelry suppliers
You must be logged in to post a comment.
cheap wholesale jewelry websites 1. The chassis installation can be inserted on the foot. When connecting the power cord, you should also pay attention to ensure that the machine is connected when the power is disconnected, and the separated power cord can be inserted into the jack of the rear of the body, which is relatively simple. 2. Tighten the bottom nut and tighten the bottom nut on the bottom hole. 3. Adjust the length of the telescopic rod to spin the pine lock and tighten nut, pull the lift tube out of the column, and then lock the nut tightly with lock lock. 4. Insert the fuselage to lock the thread of the thread of the thread of the fuselage, insert the fuselage into the lifting pipe, and tighten the clamping nut. Loose a lock -up tight nut, adjust to the required height, and tighten the nut. 5. The rear mesh hood rotates the wind leaf from the motor shaft and fixes the nut and then turns down the triangular nut, and then puts the rear mesh. 6. Tighten the net cover nut. 7. When installing wind leaves, the grooves behind the wind leaves should be stuck on the limited sale of the motor 8. Tighten the fan leaf and tighten the fan leaf and the screw to be counterclockwise. Fixed nut. 9. Install the mesh cover and fasten the mesh cover and buckle it tightly, and a landing fan is assembled.